Govoni Truck Tools

GO1358 - Brake Caliper Trolley - HGV Professional handling trolley designed for the safe removal and installation of brake calipers on heavy-duty vehicles. Suitable for use in multiple working positions including upper, lower and lateral applications. Key Features Enables safe, controlled handling of brake calipers during service operations Secure fastening system holds components firmly in position Suitable for upper, lower and left/right working positions Compatible with buses, trucks and a wide range of industrial vehicles Four Ø80 mm swivel castors for easy mobility in confined spaces Rear castors fitted with brakes for added stability Applications Brake caliper removal and installation Heavy commercial vehicle maintenance Workshop handling operations on trucks, buses and industrial vehicles Technical Data Load capacity: 70 kg Cylinder stroke: 125 mm

Read more less

GO1357 - Wheel Hub, Brake Disc and Drum Brake Holder Trolley Professional handling trolley designed for the safe removal and installation of wheel hubs, brake discs and drum brakes on heavy-duty vehicles. Suitable for use across a wide range of buses, trucks and industrial applications Features & Benefits Enables controlled lifting and positioning of heavy brake components Removable integrated winch for safe and precise operation Compatible with 8 and 10 bolt wheel hubs Optional kit available for drum brake applications Four swivel castors (Ø80 mm) for easy maneuverability in confined workshop areas Rear castors fitted with brakes for added stability Applications Wheel hub removal and installation Brake disc handling Drum brake servicing Heavy commercial vehicles including trucks and buses Technical Data Load capacity: 150 kg Cylinder stroke: 125 mm

Read more less

GO959 - Nox Sensor Thread Repair Tap M22 X 1.5 Restore Damaged Threads – Without Damaging the Exhaust The GO959 NOx Sensor Thread Repair Tap provides a fast, professional solution for restoring damaged or contaminated sensor threads directly on the vehicle. Designed for use on both light and heavy-duty diesel engines, it allows technicians to re-thread NOx sensor ports without removing or replacing the exhaust system.  Key Features M22 x 1.5 thread repair tap for NOx sensor applications Restores damaged threads in-situ, reducing downtime and repair costs Suitable for blind holes, ensuring full thread regeneration to the end of the bore 6 tensioning grooves for smooth cutting and optimal chip removal Compact hex drive (SW13) for easy use in restricted spaces Manufactured from HSCO steel for durability and long service life Applications Compatible with a wide range of manufacturers including:Audi, Vw, Porsche, Opel, Mercedes-Benz, Bmw, General Motors, Man Full range of Govoni available - click to see the  Govoni Catalogue or Govoni Garage Equipment Catalogue This tool is universally used for light and heavy diesel engines, this tool allows you to professionally restore the thread of the NOx sensor hole without damaging the exhaust system.  The tool is equipped with an alignment guide at the front of the male threader to ensure a correct angle. With an extra short body, the tool can be used with a socket wrench or ratchet wrench in tight spaces. Optimal for cleaning and regenerating threads up to the end of the thread/stop blind hole. Application Audi, Vw, Porsche, Opel, Mercedes-Benz, Bmw, General Motors, Man Technical data Square Drive: SW 13 mm Length: 50 mm Tensioning grooves: 6 Material: HSCO Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system. Used mainly on the front and rear axles of heavy vehicles. Even the most stubborn screws are released with the blow of a hammer on the end of the wrench. All wrenches are equipped with a ¾" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions. Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction). It is no longer necessary to remove the lever of the steering control tie rod.   Application: MB Atego, Actros/Kässbohrer Bus   Technical data: Length: 220mm 6-side profile   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Use this tool kit to remove and refit slotted bushes properly. The slight conical grinding makes it possible to extract and reuse bushes without damage. The tools may be fit directly on the vehicle without removing entire axes components. Pressers may also be used on the workshop press. By means of the locking device and relating half-shells, bushes are pre-tensioned carefully and parallel to one another so they can be pressed easily into their seat. While the bush is often damaged using commercial tapered sockets, the assembly operations do not damage/deform/detach the bearing's cover when this locking device system is used. The half-shells are fixed securely inside the locking device so they will not slip out. The kit includes a wide selection of the most common applications with high market coverage. Other half-shell kits will soon follow to ensure the subsequent removal of the system. Due to the partly enormous forces required especially for removal, the kit includes GO1012 12T Hydraulic cylinder , which is optimal for integrations.   20017000 or 20017500 Hand Operated Hydraulic Aluminium Pump or similar is required in order to operate the kit Application Ø 75mm MB Actros (stabilizer) Ø 70mm MAN Ø 68mm MAN (front spring) ROR, SAF Ø 66mm IVECO Eurostar (driver’s cabin) Ø 65mm MB Actros (stabilizer), Atego Ø 63mm DAF Ø 60mm MB/IVECO Eurostar (stabilizer), Renault Kerax, Magnum, Premium (leaf spring eye) Ø 58mm MB 3229 B, 652, 650/Volvo Ø 56mm IVECO Eurostar (driver’s cabin)   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 6-teeth - tooth width 10 mm Inner Ø 110 mm - Sq 1” Applications: Low-platform bus with gantry axle HDNP-1300 Suitable for MAN AUTOBUS   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system. Used mainly on the front and rear axles of heavy vehicles. Even the most stubborn screws are released with the blow of a hammer on the end of the wrench. All wrenches are equipped with a ¾" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions. Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction). It is no longer necessary to remove the lever of the steering control tie rod.   Application: MAN TGL Technical data: Length: 219mm Hex profile   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system. Used mainly on the front and rear axles of heavy vehicles. Even the most stubborn screws are released with the blow of a hammer on the end of the wrench. All wrenches are equipped with a ¾" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions. Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction). It is no longer necessary to remove the lever of the steering control tie rod.   Application: MB Atego/Actros, SAF Technical data: Length: 219mm Bi-hex profile Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

They allow for the assembly/disassembly of the brake caliper fixing screws when working on the braking system. Used mainly on the front and rear axles of heavy vehicles. Even the most stubborn screws are released with the blow of a hammer on the end of the wrench. All wrenches are equipped with a ¾" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions. It is no longer necessary to remove the lever of the steering control tie rod.   Application: MB Atego, Actros/Kässbohrer Bus  Technical data: Length: 220mm 6-side profile   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025s

Read more less

Technical data: CH. 41 mm  Octagonal 80,5mm   Application: Suitable for SCANIA Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 6-teeth - tooth width 11,5 mm Inner Ø 117 mm -  Sq 1”   Application: Rear axle models: TGA Suitable for MERCEDES, MAN   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 6-teeth - tooth width 13 mm Inner Ø 76,5 mm -  Sq 3/4”   Application: Front axle models: M3 - ME - MI Rear axle modelswith outer planetary unit: 3MR - 5MR Suitable for MAN   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO958 - Nox Sensor Thread Repair Tap M20 X 1.5 Restore Damaged Threads – Without Damaging the Exhaust The GO958 NOx Sensor Thread Repair Tap provides a fast, professional solution for restoring damaged or contaminated sensor threads directly on the vehicle. Designed for use on both light and heavy-duty diesel engines, it allows technicians to re-thread NOx sensor ports without removing or replacing the exhaust system.  Key Features M20 x 1.5 thread repair tap for NOx sensor applications Restores damaged threads in-situ, reducing downtime and repair costs Suitable for blind holes, ensuring full thread regeneration to the end of the bore 6 tensioning grooves for smooth cutting and optimal chip removal Compact hex drive (SW13) for easy use in restricted spaces Manufactured from HSCO steel for durability and long service life Applications Suitable for NOx sensors on:DAF, Mercedes-Benz commercial vehicles, Iveco, MAN, Scania, Renault commercial vehicles, and Volvo commercial vehicles. Also suitable for passenger cars fitted with M20 x 1.5 NOx or particle sensors, including:BMW, Audi, Volkswagen, Opel, and Mercedes-Benz. Full range of Govoni available - click to see the  Govoni Catalogue or Govoni Garage Equipment Catalogue

Read more less

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system. Used mainly on the front and rear axles of heavy vehicles. Even the most stubborn screws are released with the blow of a hammer on the end of the wrench. All wrenches are equipped with a ¾" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions. Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction). It is no longer necessary to remove the lever of the steering control tie rod.   Application: DAF XF95/XF105/XF106/XF Technical data: Length: 219mm Bi-hex Profile   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system. Used mainly on the front and rear axles of heavy vehicles. Even the most stubborn screws are released with the blow of a hammer on the end of the wrench. All wrenches are equipped with a ¾" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions. Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction). It is no longer necessary to remove the lever of the steering control tie rod.   Application: MAN TGA, TGS, TGX/MB, Atego from 12 ton, Actros Technical data: Length: 215mm Torx profile   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system. Used mainly on the front and rear axles of heavy vehicles. Even the most stubborn screws are released with the blow of a hammer on the end of the wrench. All wrenches are equipped with a ¾" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions. Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction). It is no longer necessary to remove the lever of the steering control tie rod.   Application: MAN, TGM, TGL/MAN Atego up to 9 Ton Technical data: Length: 215mm Torx profile   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system. Used mainly on the front and rear axles of heavy vehicles. Even the most stubborn screws are released with the blow of a hammer on the end of the wrench. All wrenches are equipped with a ¾" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions. Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction). It is no longer necessary to remove the lever of the steering control tie rod.   Application: MAN TGM - TGL  Technical data: Length: 215mm Torx profile Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Use this tool kit to remove and refit slotted bushes. The slight conical design makes it possible to extract and reuse bushes without damage. The tools may be fit directly on the vehicle without removing entire axes components. Pieces may also be used on the workshop press. By means of the locking device and relating half-shells, bushes are pre-tensioned carefully and parallel to one another so they can be pressed easily into their seat. While the bush is often damaged using commercial tapered sockets, the assembly operations do not damage/deform/detach the bearing's cover when this locking device system is used. The half-shells are fixed securely inside the locking device so they will not slip out. The kit includes a wide selection of the most common applications with high market coverage. Other half-shell kits will soon follow to ensure the subsequent removal of the system. Due to the partly enormous forces required especially for removal, the use of a hydraulic cylinder is recommended. The Govoni 12-ton hydraulic cylinder is therefore optimal for integrations.  (See kit GO1310R to purchase with the GO1012 Hydraulic Cylinder) 20017000 or 20017500 Hand Operated Hydraulic Aluminium Pump or similar is required in order to operate the kit Applications: Ø 75mm MB Actros (stabilizer) Ø 70mm MAN Ø 68mm MAN (front spring) ROR, SAF Ø 66mm IVECO Eurostar (driver’s cabin) Ø 65mm MB Actros (stabilizer), Atego Ø 63mm DAF Ø 60mm MB/IVECO Eurostar (stabilizer), Renault Kerax, Magnum, Premium (leaf spring eye) Ø 58mm MB 3229 B, 652, 650/Volvo Ø 56mm IVECO Eurostar (driver’s cabin)   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Loosen the nut of the rear reduction hypoid axle Rear axle models: HL0/3 - HL0/6 - HL0/7 - HL1/2 - HL1/3 - HL1/8 - HL1/9 - HL2/2 - HL2/3 - HL2/5 HL2/9 - HL2/11 - HL2/12 - HL2/15 Specific for MERCEDES SPRINTER - 412T - VW - LT Dimensions: 6 teeth - tooth width 7.5 mm - inner Ø 63 mm Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: CH. 90 mm - Sq 1”   Application: Suitable for IVECO   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: CH. 105 mm - Sq 1”   Application: Suitable for IRISBUS, VOLVO   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: CH. 105 mm - H. 57 mm - Sq 1”   Application: Suitable for RENAULT   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: CH. 105,4 mm - depth 38 mm - Sq 1”   Application: Suitable for RENAULT, VOLVO, FIAT, DAF   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 4-teeth - tooth width 13,5 mm - Sq 1”   Application: Suitable for RENAULT   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: CH. 115,7 mm - depth 45 mm - Sq 1"   Application: Suitable for RENAULT Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: CH. 95 mm - depth 28 mm - Sq 1”   Application: Suitable for RENAULT, VOLVO, FIAT   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: CH. 80 mm - depth 16 mm - Sq 1”   Application: Suitable for RENAULT   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: CH. 80 mm - depth 23 mm - Sq 1”   Application: Suitable for RENAULT BUS, EUROCARGO, EUROTECH   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: CH. Ø 77 mm - Sq 1"   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: Hexagonal nut 95 mm - Sq 1”   Application: Rear axle Trailer axle Axle with compact bearings   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: Inner Ø 74 mm - Sq 1”   Application: Suitable for BPW 12TN   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: Inner Ø 90 mm - Sq 1”   Application: Suitable for BPW 9TN   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 60x76 mm - Sq 1”   Application: Front axle models: SK VL5/1 D9-2629 in 6x4. 2635 in 6x4. 3535K 8x4 Suitable for MERCEDES, MAN   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 56x71 mm - Sq  1”   Application: Axle models KÄSSBOHRER/SETRA: front axle 6,5 and 7,5t of type S 210 and 215, SG 219-221 and dead axle types S 216 HDS and S 228 DT types 0303, 0305-G and 0307 Axle models DAF, Mercedes: VL 3/8, 4/7, 4/9, 4/15, VD 4/14, of type 363, 385, 387, 389, 391, 393, 395, 617, 620, 621, 622, 623, 625, 649 Axle models Mercedes - Bus: VO 3/10, 4/11, 4/13 and 4/19 of type 0303, 0305-G and 0307   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: Ø 123 mm Hexagon 110 mm   Application: Suitable for FRUEHAUF   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data; Octagon 84 mm Ø 83 mm   Application: Suitable for R.O.R.   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 4-teeth - tooth width 7,6 mm Inner Ø 91 mm - Sq 1”   Application: Rear axle Suitable for SCANIA   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 6-teeth - tooth width 10 mm Inner Ø 75 mm - Sq 3/4”   Application Rear axle models: HL2/14, HL2/30, KL2/16, KL4/1, KL4/16, KL4/17, KL4/23, KL4/28, KL4/29, KL4/4, KL4/8, KD4/6G, HO4/2, HO4/18, NR4/4   Front axle models: AL3/1, AL3/2, AL3/3, AL3/4, AL3/7, AL3/8   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 12-teeth - tooth width 8 mm Inner Ø 90 mm - Sq 1”   Application: BRG year 2001 Suitable for MERCEDES ACTROS 1840   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: Octagon 127 mm Ø 126 mm   Application: Suitable for R.O.R.   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 6-teeth - tooth width 7,5 mm Inner Ø 101 mm - Sq 1” Application: Suitable for MERCEDES ATEGO Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025  

Read more less

Technical data: 6-teeth - tooth width 8 mm Inner Ø 92,5 mm - Sq 1” Application: Front axle models: TGA V9 - 82L - 01 Suitable for MAN   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: Polygon 85 mm Inner Ø 83 mm - Sq 1”   Application: Suitable for IVECO Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: Hexagon 140 mm - Sq 1”   Application: Suitable for S.A.F. Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: Hexagon 160 mm -  Sq 1”   Application: Suitable for FONTENAC RENAULT Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 6-teeth - tooth width 9,8 mm Inner Ø 113 mm - ☐ 1”   Application: Axle models: NS4/2 - NS4/10 Sprocket axle models: HL6/1, HL6/2, HL6/3, HD6/3   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 6-teeth - tooth width 10 mm Inner Ø 77 mm - Sq 1”   Application: Front axle models: VW2 - VW4 - VW6.1 - 6.8 Suitable for MAN   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data: 6-teeth - tooth width 10,9 mm Inner Ø 71,5 mm - Sq 3/4”   Application: Rear axle models: HL2/2, HL2/7, HL2/13   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less